Reference Guide

Configuration & Image File Commands 145
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Plasma-ARC
2+3\new_system_mifs_ARC3_latest\Configuration_Image.fm
DELL CONFIDENTIAL – PRELIMINARY 5/21/14 - FOR PROOF ONLY
Default Configuration
This command has no arguments or keywords.
Command Mode
Privileged EXEC mode
User Guidelines
The following keywords and URL prefixes are supported
•flash:// — URL of the FLASH file.
•startup-config — Startup configuration file.
• WORD — Name of file (e.g. backup-config).
*.sys and *.prv files cannot be renamed.
Example
The following example renames the configuration backup file.
console# rename backup-config m-config.bak
boot system
The boot system Privileged EXEC mode command specifies the active
system image file that will be loaded by the device at startup.
Syntax
boot system {image-1 | image-2}
Parameters
• image-1 —Specifies that image-1 is loaded as the system image during the
next device startup.
•
image-2 —Specifies that image-2 is loaded as the system image during the
next device startup.
Default Configuration
This command has no default configuration.