Administrator Guide
Table 4. Supported environment and system requirements with IDPA versions(continued)
Version LDAP Secure Remote Services
2.3.1 A supported LDAP server for Search
• IDPA 2.3 and later versions support both Secure
LDAP and External LDAP.
• Open LDAP 2.4 and later.
• Microsoft Active Directory on Windows Server
2008 R2 and/or Windows Server 2012 R2.
If available, configure the Secure Remote Services VE Gateway
(Centralized configuration) 3.20.00.08 or later.
2.3 A supported LDAP server for Search
• IDPA 2.3 and later versions support both Secure
LDAP and External LDAP.
• Open LDAP 2.4 and later.
• Microsoft Active Directory on Windows Server
2008 R2 and/or Windows Server 2012 R2.
If available, configure the Secure Remote Services VE Gateway
(Centralized configuration) 3.20.00.08 or later.
2.2 A supported LDAP server for Search
• Open LDAP 2.4 and later.
• Microsoft Active Directory on Windows Server
2008 R2 and/or Windows Server 2012 R2.
If available, configure the Secure Remote Services VE Gateway
(Centralized configuration) 3.20.00.08 or later.
2.1 A supported LDAP server for Search
• Open LDAP2.3, 2.4, and later.
• Microsoft Active Directory on Windows 2003 R2
and later.
If available, configure the Secure Remote Services VE Gateway
(Centralized configuration) 3.20.00.08 or later.
2.0 A supported LDAP server for Search
• Open LDAP2.3, 2.4, and later.
• Microsoft Active Directory on Windows 2003 R2
and later.
If available, configure the Secure Remote Services VE Gateway
(Centralized configuration) 3.20.00.08 or later.
NOTE: For more information about Secure Remote Services, see the
EMC Secure Remote Services Technical
Description
document.
Before working inside your computer
Prerequisites
Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety.
Unless otherwise noted, each procedure included in this document assumes that the following conditions exist:
• You have read the safety information that shipped with your computer.
• A component can be replaced or--if purchased separately--installed by performing the removal procedure in reverse order.
About this task
NOTE:
Before working inside your computer, read the safety information that shipped with your computer. For
additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/
regulatory_compliance
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow
the safety instructions that came with the product. To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface, such as a connector on the back of the
computer.
Introduction 7