Users Guide

Supported operating systems
The S130 controller supports the following operating systems:
NOTE: It is highly recommended to see Dell EMC Enterprise operating systems support section to view the information on
the supported operating systems by a specific server.
● Microsoft
○ Windows Server 2019
○ Windows Server 2016
○ Windows Server 2012 R2
○ Windows Server 2012
○ Windows Server 2008 R2 SP1 (64-bit)
NOTE: While you install the Windows Server 2012 operating system, ensure that you install the hot fix update
available at support.microsoft.com/kb/2789962.
● Linux
○ SLES 15 and above
○ SLES 12 SP1 and above
○ SLES 11 SP4
○ RHEL 8.0
○ RHEL 7.2 and above
○
NOTE:
For the latest list of supported operating systems and driver installation instructions, see the system
documentation at https://www.dell.com/operatingsystemmanuals. For specific operating system service pack
requirements, see the Drivers and Downloads section at www.dell.com/support/drivers.
Supported PowerEdge systems
The following PowerEdge systems support S130 controller:
● Dell PowerEdge R730
● Dell PowerEdge T630
● Dell PowerEdge R630
● Dell PowerEdge R530
● Dell PowerEdge T430
● Dell PowerEdge R430
● Dell PowerEdge C4130
● Dell PowerEdge M630 (for M1000e enclosure)
● Dell PowerEdge M630 (for VRTX enclosure)
● Dell PowerEdge FC630
● Dell PowerEdge M830 (for M1000e enclosure)
● Dell PowerEdge M830 (for VRTX enclosure)
● Dell PowerEdge FC830
● Dell PowerEdge FC430
● Dell PowerEdge R330
● Dell PowerEdge R230
● Dell PowerEdge T330
● Dell PowerEdge T130
Supported physical disks
The PERC S130 controller supports the following physical disk types:
● SATA Hard Disk Drive (HDD)
● SATA Solid State Drive (SSD)
8
Overview