Users Guide

b. Select the physical disks with Windows RAID configuration listed, and click the link CONVERT TO NON-RAID. If you do
not want to convert the disks to non-RAID, remove the physical disks with Windows RAID configurations from the
system.
NOTE: The S130 controller does not support mixed RAID configuration. If the mixed RAID configuration with both Windows
and Linux RAID disks is detected, then you cannot perform any further tasks until you clear the physical disks or convert the
physical disks.
Manage virtual disk properties
The View Virtual Disk Properties screen allows you to view the virtual disk properties and the policies.
In the System Setup Main Menu, click Device Settings > Dell PERC S130 Configuration Utility > Virtual Disk
Management > Manage Virtual Disk Properties.
The table explains the Manage Virtual Disk Properties screen details:
Menu Item
Description
Virtual Disk
Status
Displays the virtual disk status.
Virtual Disk
Capacity
Displays the capacity of the virtual disk.
Sector Size Displays the sector size enabled.
Read Cache
Policy
Displays the read cache policies associated with the virtual disk.
Write Cache
Policy
Displays the write cache policies associated with the virtual disk.
Physical Disk
Write Cache
Displays the status of the physical disk write cache policy.
Modify the
Physical Disk
Write Cache
Enables you to modify the physical disk write cache policy settings.
NOTE: If you have Linux RAID configured on the system then you cannot modify any settings in this
field.
Physical disk
Write Cache
Enables you to change the physical disk write cache policy settings.
NOTE: If you have Linux RAID configured on the system then you can only view the physical disk
write cache setting.
View Associated
Physical Disk
Clicking this link displays the physical disk that is associated with the specific virtual disk
Viewing virtual disks properties and policies
View Virtual Disk Properties screen allows you to view the virtual disk properties and the policies.
In the System Setup Main Menu, click Device Settings > Dell PERC S130 Configuration Utility > Virtual Disk
Management > View Virtual Disk Properties.
The table explains the View Virtual Disk Properties screen details:
Menu Item
Description
Virtual Disk ID Displays the virtual disk ID.
RAID level Displays the RAID level associated with the virtual disk.
Virtual Disk
Status
Displays the status of the virtual disk.
Virtual Disk
Capacity
Displays the capacity of the virtual disk.
UEFI RAID configuration utility 31