Users Guide

Manage virtual disks in enterprise key manager mode
Virtual disks are managed in the same way in enterprise key manager mode as in local key manager mode. SED capable virtual
disks can be secured during or after creation. See Create a secured virtual disk.
Manage nonRAID disks in enterprise key manager mode
NonRAID disks are managed in the same way in enterprise key manager mode as in local key manager mode. SED capable non
RAID disks can be secured after creation. See Create a secured virtual disk.
Migration of drives from local key management to enterprise key
management
Local key management drives can be migrated to an enterprise key management enabled system, but the controller cannot be
transitioned from local key management mode to enterprise key manager mode or the reverse without first disabling security on
the controller. Perform the following steps to migrate local key management drives to enterprise key management:
Steps
1. Save the current local key management security key.
2. Shut down both systems.
3. Remove the local key management drives and re-insert them to the enterprise key manager enabled system.
4. Power on the enterprise key manager system.
5. Navigate to HII foreign configuration.
6. Enter the local key management keys for those drives.
7. Import the configuration.
NOTE:
Once local key management drives are migrated to enterprise key manager, they cannot be migrated back to
local key management mode. The drives have to be cryptographically erased to disable security and then converted back
to local key management disks. For more information on performing this action, contact https://www.dell.com/
supportassist.
Security key and RAID management 65