Users Guide

3. Click Task Rates.
The following options are displayed:
● Background Initialization (BGI) Rate
● Consistency Check Rate
● Rebuild Rate
● Reconstruction Rate
4. You can make the necessary changes and then click Apply Changes.
The task rates operation is completely successfully.
Properties of Enterprise Key Management (EKM)
Steps
1. Enter the Dell PERC 11 Configuration Utility. See Navigate to Dell PERC 11 configuration utility.
2. Click Main Menu > Controller Management > Advanced Controller Properties.
3. Click Enterprise Key Management.
The properties of Enterprise Key Management is displayed.
Controller properties
Auto import foreign configuration
Steps
1. Enter the Dell PERC 11 Configuration Utility. See Navigate to Dell PERC 11 configuration utility.
2. Click Main Menu > Controller Management > Advanced Controller Properties.
3. In the Controller Properties section, set the Auto Import Foreign Configuration option to Enabled or Disabled.
4. Click Apply Changes.
Disable auto import
Steps
1. Enter the Dell PERC 11 Configuration Utility. See Navigate to Dell PERC 11 configuration utility.
2. Click Main Menu > Controller Management > Advanced Controller Properties.
3. In the Controller Properties section, set the Auto Import Foreign Configuration option to Disabled.
4. Click Apply Changes.
The auto import is disabled successfully.
Enable auto import
Steps
1. Enter the Dell PERC 11 Configuration Utility. See Navigate to Dell PERC 11 configuration utility.
2. Click Main Menu > Controller Management > Advanced Controller Properties.
3. In the Controller Properties section, set the Auto Import Foreign Configuration option to Enabled.
4. Click Apply Changes.
The auto import is enabled successfully.
Select boot mode
Steps
1. Enter the Dell PERC 11 Configuration Utility. See Navigate to Dell PERC 11 configuration utility.
2. Click Main Menu > Controller Management > Advanced Controller Properties.
50
Manage PERC 11 controllers using HII configuration utility