Users Guide
2. Click Main Menu > Controller Management > Advanced Controller Management.
3. Click Disable security.
A screen is displayed asking if you are sure you want to disable security.
4. Select Confirm and click Yes to continue.
The operation is successful and click Ok.
Change security settings
Steps
1. Enter the Dell PERC 11 Configuration Utility. See Navigate to Dell PERC 11 configuration utility.
2. Click Main Menu > Controller Management > Advanced Controller Management.
3. Click Change Security Settings, select Change Current Security Settings.
4. Click Ok.
5. If you want to use the passphrase generated by the controller, click Suggest Passphrase and Confirm the passphrase by
re-entering.
The operation is successful.
6. Click Save Security Settings.
7. Select Confirm and click Yes to continue.
The operation is successful and click Ok.
Restore factory default settings
Steps
1. Enter the Dell PERC 11 Configuration Utility. See Navigate to Dell PERC 11 configuration utility.
2. Click Main Menu > Set Factory Defaults.
A screen is displayed asking you to confirm the operation.
3. Select Confirm and click Yes to continue.
Auto configure behavior
Steps
1. Enter the Dell PERC 11 Configuration Utility. See Navigate to Dell PERC 11 configuration utility.
2. Click Main Menu > Controller Management > Advanced Controller Management > Manage Controller Mode.
You can view current Controller Mode.
3. Click Manage Controller Mode.
You can view/change the physical disk settings for the controller, if required. The possible options are:
● Off and Non–RAID Disk
4. Click Apply Changes to save the changes.
5. Select Confirm and click Yes to continue.
Manage controller profile
About this task
View the details of the profile and choose the desired profile, if supported. To view the properties of the controller profiles:
Steps
1. Enter the Dell PERC 11 Configuration Utility. See Navigate to Dell PERC 11 configuration utility.
2. Click Main Menu > Controller Management > Advanced Controller Management > Manage Controller Profiles.
The current profile and profile properties are displayed.
48
Manage PERC 11 controllers using HII configuration utility