Users Guide

Firmware

This section provides information about downloading and installing the firmware using Dell Update Package (DUP).

Topics:

• Install the PERC 11 firmware using Dell Update Package (DUP)

Install the PERC 11 firmware using Dell Update

Package (DUP)

Steps

1. Navigate to www.dell.com/support/home.

2. Locate your controller.

3. Download the DUP.

a. For Window/iDRAC update, download Windows executable file.

b. For Linux update, download .bin file.

NOTE: For VMware, firmware should be updated through iDRAC or the PERC CLI utility.

4. Install the DUP.

a. For Windows, run the executable in Windows environment.

b. For Linux, run .bin file in Linux environment.

c. For iDRAC, navigate to system iDRAC > Maintenance > System Update, upload Windows executable, and then install.

Firmware 41