Users Guide

3. Select the Secure Virtual Disk option.
4. Click Create Virtual Disk.
The secure virtual disk is created successfully.
Secure non-RAID disks
In HII, secure non-RAID disks by using the security settings of the controller.
1. Enter the Dell PERC 10 Configuration Utility. See Navigating to Dell PERC 10 configuration utility.
2. Click Main Menu > Physical Disk Management.
The list of virtual disks is displayed.
3. Select a non-RAID disk.
4. From the Operations drop-down menu, select Secure Non-RAID Disk.
Secure preexisting virtual disk
1. Enter the Dell PERC 10 Configuration Utility. See Navigating to Dell PERC 10 configuration utility.
2. Click Main Menu > Virtual Disk Management.
The list of virtual disks is displayed.
3. Select a virtual disk.
4. From the Operations drop-down menu, select Secure Virtual Disk.
NOTE: The virtual disks can be secured only when the virtual disks are in Optimal state.
Importing secure virtual disk
NOTE: The controller must have an existing security key before importing secured foreign virtual disk.
1. Enter the Dell PERC 10 Configuration Utility. See Navigating to Dell PERC 10 configuration utility.
2. Click Main Menu > Configuration Management > Manage Foreign Configurations > Preview Foreign
Configurations.
3. Click Import Foreign Configuration.
A screen is displayed asking if you are sure you want to perform the operation.
4. Enter Passphrase if importing virtual disk with a different passphrase.
5. Select the Confirm option.
6. Click Yes.
The foreign configuration is imported successfully.
Import secured non-RAID disk
If you are inserting a secured non-RAID disk into a system in which the controller key is different from the security key on the
drive, the security key from the system where it was initially secured must be provided in HII.
NOTE: The controller must have an existing security key before importing a secured non-RAID disk.
1. Enter the Dell PERC 10 Configuration Utility. See Navigating to Dell PERC 10 configuration utility.
2. Click Main Menu > Configuration Management > Manage Foreign Configurations.
3. Click Enter Passphrase for Locked Disks.
A screen is displayed asking if you are sure you want to perform the operation.
4. Enter Passphrase if importing disk with a different passphrase.
5. Select the Confirm option.
6. Click Yes.
74
Security key and RAID management