Users Guide

controllers. The system can then boot from the BIOS-enabled controller. Perform the following steps to
enable the controller BIOS:
1. Press <Ctrl> <N> to access Ctrl Mgmt menu screen.
2. Press <Tab> to move the cursor to Enable Controller BIOS in the Settings box.
3. Press the spacebar to select Enable Controller BIOS.
An X is displayed beside Enable Controller BIOS.
4. Press <Tab> to move the cursor to the Apply button, and then press <Enter> to apply the selection.
The controller BIOS is enabled.
To disable the controller BIOS, use the spacebar to de-select the Enable Controller BIOS control,
and then select Apply and press <Enter>.
Enabling Boot Support For A BIOS-Enabled Controller
1. Press <Ctrl> <N> to access the Ctrl Mgmt menu screen.
2. Press <Tab> to move the cursor to the Select Boot Device in the Settings box.
3. Press the down-arrow key to display a list of virtual disks and Non-RAID physical disks (PERC H310
only).
4. Use the down-arrow key to highlight a virtual disk or Non-RAID physical disk (PERC H310 only).
5. Press <Enter> to select the disk.
6. Press <Tab> to move the cursor to the Apply button, and then press <Enter> to apply the selection.
Boot support is enabled for the selected controller.
Enabling BIOS Stop On Error
The option BIOS Stop on Error is used to stop the system from booting if there are BIOS errors. Perform
the following steps to enable BIOS Stop on Error.
1. Press <Ctrl> <N> to access the Ctrl Mgmt menu screen.
2. Press <Tab> to move the cursor to Enable BIOS Stop on Error in the Settings box.
3. Press the spacebar to select Enable BIOS Stop on Error.
An X is displayed beside Enable BIOS Stop on Error.
4. Press <Tab> to move the cursor to the Apply button, and then press <Enter> to apply the selection.
The controller BIOS is enabled. To disable Enable BIOS Stop on Error, use the spacebar to de-select
Enable BIOS Stop on Error, then select Apply and press <Enter>.
Enabling Auto Import
If there is a native configuration present on the controller, the option Enable Auto Import automatically
imports every online foreign configuration during boot without having the need to access the BIOS
Configuration Utility (<Ctrl> <R>).
NOTE: The controller automatically imports every optimal and degraded foreign configuration
without enabling the feature if there is no native configuration on the controller.
To enable Auto Import:
1. Press <Ctrl> <N> to access the Ctrl Mgmt menu screen.
2. Press <Tab> to move the cursor to Enable Auto Import in the Settings box.
3. Press the spacebar to select Enable Auto Import.
59