Users Guide

Figure 3. Removing and Installing the PERC Mini Monolithic Controller

1. release lever (2) 2. storage-controller card holder

3. storage controller card 4. battery

5. heatsink 6. touch points (2)

7. storage-controller card connector on the

system board

8. guide pins (2)

Installing The PERC Controller

To install the PERC controller:

1. Perform a controlled shutdown of the system and attached peripherals.

2. Disconnect the system from the electrical outlet and remove the system cover.

3. Install the storage controller in the appropriate controller slot and connect all the cables to the

storage controller.