Users Guide

故障 101
Multibit ECC errors were
detected on the RAID
controller.If you
continue, data corruption
can occur.Contact
technical support to
resolve this issue.Press
'X' to continue or else
power off the system,
replace the controller
and reboot. RAID 控制器上
检测到多 ECC 错误。如果继
续,可能会出现数据损坏。请与技
术支持联络以解决此问题。按 X
键继续,则请关闭系统电源,更
控制器并重新引导。
错误 PERC 6/i 控制器有。
ECC 错误 (MBE) 在内存中出现,可能
损坏和放弃高速缓存的数据。
注意 : MBE 错误重,可导致数
据损坏和数据丢失。如出现 MBE 错误,请
Dell 术支持联
: 引导期间控制器上检测到个单
ECC 错误,会示类的信息。
Multibit ECC errors were
detected on the RAID
controller.The DIMM on
the controller needs
replacement.If you
continue, data corruption
can occur.Press 'X' to
continue or else power
off the system and
replace the DIMM module
and reboot.If you have
replaced the DIMM please
press 'X' continue.RAID
控制器上检测到多位 ECC 错误。
要更换控制器上的 DIMM。如
继续,可能会出现数据损坏。
X 继续否则请关系统电
,更换 DIMM 模块并重新引
导。如果已更换 DIMM,请 X
继续。)
错误 PERC 6/E 控制器有。
ECC 错误 (MBE) 在内存中出现,可能
损坏和放弃高速缓存的数据。
6-1. BIOS 错误和警告 (续)
信息 含义