Users Guide
100 故障排除
The foreign configuration
message is always present
during POST but no
foreign configurations
are present in the
foreign view page in
CTRL+R and all virtual
disks are in an optimal
state. (POST 期间始终显示外
部配置信息,但 CTRL+R 的外部
视图页中没有显示任何外部配置,
并且所有虚拟磁盘均为最佳状
态。)
使用 CTRL+R 或 Dell OpenManage™ Server
Administrator Storage Management 清除外部
配置。
注 : 当您清除外部配置后,物理磁盘会转为
Ready (就绪)状态,这可能会导致数据丢
失。
如果插入到系统中的物理磁盘先前是虚拟磁
盘的成员,并且已通过重建使用更换的磁盘
代替该磁盘先前的位置,则新插入的磁盘
(先前是虚拟磁盘的成员)必须手动删除其
外部配置标志。
Previous configuration(s)
cleared or
missing.Importing
configuration created on
XX/XX XX.XX.Press any key
to continue, or °ØC°Ø to
load the configuration
utility. (先前的配置已清除
或丢失。导入在 XX/XX XX.XX 创
建的配置。按任意键继续,或按 C
键载入配置公用程序。)
该信息表示控制器和物理磁盘具有不同的配
置。您可以使用 BIOS 配置公用程序来清除
外部配置。
Invalid SAS topology
detected.Please check
your cable
configurations, repair
the problem, and restart
your system. (检测到无效的
SAS 拓扑。请检查您的电缆配置,
修复该问题,然后重新启动系
统。)
系统的 SAS 电缆连接不正确。请检查电缆连
接并修复问题 (如果有)。重新启动系统。
表 6-1. BIOS 错误和警告 (续)
信息 含义