Reference Guide

Default Value Normal
Write Privilege Server Configuration
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise
Dependency None
Storage.Controller.CheckConsistencyRate (Read or Write)
Description
The Check Consistency rate is the percentage of the system's resources dedicated to performing a check
consistency on a redundant virtual disk.
Legal Values None
Default Value 30
Write Privilege Server Configuration
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise
Dependency None
Storage.Controller.ControllerBootMode (Read or Write)
Description
This indicates the current BootMode setting of the Controller.
NOTE: Some values may not be supported, depending on the PERC controller you have installed and
the firmware version.
Legal Values
● User Mode
● Continue Boot On Error
● Headless Mode Continue On Error
● Headless Safe Mode
Default Value Continue Boot On Error
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency None
Storage.Controller.ControllerEncryptionMode (Read Only)
Description
This attribute represents encryption mode on the controller. It could be used to set the encryption mode
to Local Key Management or Secure Enterprise Key Manager on the controller via Server Configuration
Profile (SCP) feature only.
NOTE: Secure Enterprise Key Manager (SEKM) for PERC 10 is now supported.
Legal Values
● None
● Local Key Management
● Secure Enterprise Key Manager
Default Value None
Write Privilege None
License Required iDRAC Basic, iDRAC Express, or iDRAC Enterprise
Dependency If set to 'Local Key Management' you must set KeyID and NewControllerKey.
Storage Attributes 671