Reference Guide

● iSCSI Secondary
● iPXE without failover
● iSCSI without failover
Default Value varies
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
NIC.NICConfig.LnkSpeed (Read or Write)
Description
Selector for link speed(s) to be advertised to link partner for boot operations. Implementations should
only include supported link speeds. Existing implementations may remain unchanged, new implementations
should not use those speeds listed as deprecated but use the new speeds that have been added that infer
what modulation scheme is in use, NRZ or PAM4. New implementations should transition to allow multiple
speeds to be selected instead of just one in a simple enumeration scheme. Note: the attribute type is
changed from simple enum to checkbox to allow the user to select multiple link speeds to advertise if so
desired.
Legal Values
● Auto Negotiated
● 10 Mbps Half
● 10 Mbps Full
● 100 Mbps Half
● 100 Mbps Full
● 1 Gbps
● 10 Gbps
● 25 Gbps
● 40 Gbps
● 50 Gbps (2x25)
● 50 Gbps (1x50)
● 100 Gbps (4x25)
● 100 Gbps (2x50)
● 100 Gbps (1x100)
● 200 Gbps (4x50)
● 200 Gbps (2x100)
● 200 Gbps (1x200)
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
NIC.NICConfig.NumberVFAdvertised (Read or Write)
Description
This value is the number of PCI Virtual Functions Advertised by the port (function) in PCI config space
when SR-IOV is enabled in non-NPar mode.
Legal Values
● N/A
Default Value 0
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
646 NIC Attributes