Reference Guide

Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
NIC.IscsiSecondTgtParams
To configure the iSCSIsecond storage, use the objects in this group.
NIC.IscsiSecondTgtParams.ConnectSecondTgt (Read or Write)
Description
Setting to enable whether connection to the second target is attempted.
Legal Values
● Enabled
● Disabled
Default Value Disabled
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
NIC.IscsiSecondTgtParams.SecondTgtBootLun (Read or Write)
Description
Specifies the second iSCSI target boot LUN.
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
NIC.IscsiSecondTgtParams.SecondTgtChapId (Read or Write)
Description
Second Target CHAP ID (up to 128 characters in length). If only a single value of CHAP ID supported for
all targets then it is stored here
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
NIC.IscsiSecondTgtParams.SecondTgtChapPwd (Read or Write)
Description
Second Target CHAP Secret (0 or 12 to 16 characters in length). If only a single value of CHAP Secret is
supported then it is stored here
Legal Values None
642 NIC Attributes