Reference Guide

NIC.IscsiGenParams.WinHbaBootMode (Read or Write)
Description
Controls if adapter boots as an iSCSI Offload HBA or uses software initiator mode
Legal Values
● Enabled
● Disabled
Default Value Disabled
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
NIC.IscsiInitiatorParams
The following section provides information about the objects in the NIC.IscsiInitiatorParams group.
NIC.IscsiInitiatorParams.IscsiInitiatorChapId (Read or Write)
Description
Initiator CHAP ID (up to 128 characters in length). If this can be set on a per target basis, then the first
target value shall be stored here.
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
NIC.IscsiInitiatorParams.IscsiInitiatorChapPwd (Read or Write)
Description
iSCSI initiator CHAP secret (0 or 12 to 16 characters in length). If this can be set on a per target basis,
then the value for the first target shall be stored here.
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
NIC.IscsiInitiatorParams.IscsiInitiatorGateway (Read or Write)
Description
iSCSI initiator default Gateway IP address. Will be in either IPv4 or IPv6 format depending on the value of
the IpVer attribute.
Legal Values None
Default Value None
Write Privilege None
License Required iDRAC Express or iDRAC Enterprise
NIC Attributes 637