Reference Guide

iDRAC.TelemetryFanSensor
This group contains the attributes that provides details about iDRAC telemetry fan sensor.
iDRAC.TelemetryFanSensor.DevicePollFrequency (Read Only)
Description
Displays the frequency at which the devices are polled.
Legal Values
● Integral values from 0 to 600
Default Value 5
Write Privilege Configure iDRAC
License Required iDRAC Datacenter
Dependancy None
iDRAC.TelemetryFanSensor.EnableTelemetry (Read or Write)
Description
Enables or disables the Telemetry Report.
Legal Values
● Disabled-0
● Enabled-1
Default Value 0
Write Privilege Configure iDRAC
License Required iDRAC Datacenter
Dependancy None
iDRAC.TelemetryFanSensor.ReportInterval (Read or Write)
Description
Allows to configure the interval in seconds at which the reports are generated. Configuring the value 0
will stop the interval-based report generation.
Legal Values
● Integral values from 60 to 600
Default Value 60
Write Privilege Configure iDRAC
License Required iDRAC Datacenter
Dependancy None
iDRAC.TelemetryFanSensor.ReportTriggers (Read or Write)
Description
Allows to configure the predefined triggers for report generation.
Legal Values
● String of up to 512 ASCII characters.
Default Value FANCriticalTrigger, FANWarnTrigger
Write Privilege Configure iDRAC
License Required iDRAC Datacenter
Dependancy None
iDRAC Attributes 521