Reference Guide

License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.MemSettings.ProcEmbMemSystemSize (Read or Write)
Description
Displays flat size of the MCDRAM
Legal Values None
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.MemSettings.ProcEmbMemTotalSize (Read or Write)
Description
Displays total size of the MCDRAM
Legal Values None
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.MemSettings.RawCapacity (Read or Write)
Description
Total NVDIMM raw size in the system.
Legal Values None
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.MemSettings.RedundantMem (Read or Write)
Description
Enables or disables the redundant memory feature. This feature can be enabled only if a valid redundant
memory configuration is detected. When Mirror Mode is enabled, the server maintains two identical
copies of data in memory. This feature allows the system to continue running even during a catastrophic
memory failure. NOTE: In Mirror Mode, only half of the memory size is reported to the OS. When Spare
Mode is enabled, certain sets of DIMMs or a portion of these DIMMs called a Rank will be set aside as the
spare memory. When a preset threshold of correctable errors has been reached on an active DIMM rank,
the contents of that rank will be copied to the spare memory to prevent catastrophic memory failure.
Note that in Spare Mode, the memory size reported to the OS does not include the spare portion. Default:
Disabled
For Spare Mode: Has a dependency on DIMM population where within a given channel, multi-rank DIMM
or multi single rank DIMM needs to be populated. For Mirror Mode and Lockstep Mode: Has a dependency
on DIMM population where corresponding channnels for each socket (Channel0 and Channel2, Channel1
and Channel 3) needs to be populated and populated idenditally. Not on 13G+.
220 BIOS Attributes