Reference Guide

● Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.IntegratedDevices.EmbNic3Nic4 (Read or Write)
Description
Enables or disables the OS interface of the embedded NIC3 and NIC4 controller. NOTE: If set to Disabled
(OS), the embedded NICs may still be available for shared network access by the embedded management
controller. This function must be configured via the NIC management utilities provided with your system.
Legal Values
● Enabled
● DisabledOs
● Disabled
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.IntegratedDevices.EmbNicPort1BootProto (Read or Write)
Description
This is a Write-Only attribute to control the Legacy Boot Protocol of the LOM Port specified by the
Embedded NIC port number. This attribute is for system management software use, and does not appear
in System BIOS Setup. This attribute always returns Unknown when read. There is no change to the LOM
Port Legacy Boot Protocol setting when Unknown is written. An error is returned if written with a setting
(None, PXE, or iSCSI) that is not supported by the LOM Port.
Legal Values
● Unknown
● None
● Pxe
● Iscsi
Default Value Not Applicable
Write Privilege Server Control
License Required iDRAC Express or iDRAC Enterprise
Dependency Not applicable
BIOS.IntegratedDevices.EmbNicPort2BootProto (Read or Write)
Description
This is a Write-Only attribute to control the Legacy Boot Protocol of the LOM Port specified by the
Embedded NIC port number. This attribute is for system management software use, and does not appear
in System BIOS Setup. This attribute always returns Unknown when read. There is no change to the LOM
Port Legacy Boot Protocol setting when Unknown is written. An error is returned if written with a setting
(None, PXE, or iSCSI) that is not supported by the LOM Port.
Legal Values
● Unknown
● None
● Pxe
● Iscsi
100 BIOS Attributes