Setup Guide
11 - 2015
Statement of Volatility – Dell PowerEdge R230
Dell PowerEdge R230 contains both volatile and non-volatile (NV) components. Volatile components lose their data
immediately upon removal of power from the component. Non-volatile components continue to retain their data even
after the power has been removed from the component. Components chosen as user-definable configuration options
(those not soldered to the motherboard) are not included in the Statement of Volatility. Configuration option information
(pertinent to options such as microprocessors, remote access controllers, and storage controllers) is available by
component separately. The following NV components are present in the PowerEdge R230 server.
Item
Non-Volatile or
Volatile
Quantity
Reference Designator
Size
Planer
PCH Internal CMOS
RAM
Non-Volatile
1
U_SRP1
256 Bytes
BIOS Password
Non-Volatile
1
U_SRP1
16 bytes
BIOS SPI Flash
Non-Volatile
1
U_SPI_BIOS_1
16 MB
iDRAC SPI Flash
Non-Volatile
1
U_IDRAC_SPI1
4 MB
BMC EMMC
Non-Volatile
1
U_EMMC1
4 GB
System CPLD RAM
Volatile
1
U_CPLD1
8 KB
System Memory
Volatile
Up to 4
for CPU1
CPU1: DIMMA1/A2/B1/B2
Up to 16GB per DIMM
(UDIMM)
Internal USB Key
Non-Volatile
Up to 1
INT_USB1
Varies (not factory
installed)
CPU
Volatile
1
CPU1
Various
iDRAC DDR
Volatile
1
U_IDRAC7_MEM1
256MByte
iDRAC
Volatile
1
U_IDRAC1
64 kbyte + registers
LOM EEPROM
Non-Volatile
1
U30
8Mb
1U 4x3.5”Backplanes
SEP internal flash
Non-Volatile
1
U_SEP1
Flash:32KB+4KB
EEPROM: 2KB
SAS12G HBA Card







