User manual

Appendix A – CLI Command Reference
86 ePower Power Distribution Unit User Manual, Revision 1.1
Example 3: Recursively show the available commands for the network target.
ePower:/--> show –l all -display verbs system1/settings/network
/system1/settings/network
Verbs:
cd
show
set
help
/system1/settings/network/ipv4
Verbs:
cd
show
set
help
/system1/settings/network/ipv6
Verbs:
cd
show
set
help
ePower:/-->
Example 4: Show only properties with the name “address”.
ePower:/--> show –d properties –l all /system1/settings/network address
ePower:/system1/settings/network/ipv4
Properties:
address = 10.0.2.102
ePower:/system1/settings/network/ipv6
Properties:
address = ffe8:0123:4567::0427
ePower:/-->