User manual

Appendix A – CLI Command Reference
80 ePower Power Distribution Unit User Manual, Revision 1.1
Response
Paragraph-formatted text from the CLI specification. help with no options
returns a summary.
Example 1: Display help for the show command.
ePower:/--> help –show
show [<options>] [<target>] [<properties>][propertyname==propertyvalue]
-d, -display <arg_values>
Display the parts of the element, where parts are (targets, properties, verbs, all). The
default value is all.
[Remainder of response not shown.]
Example 2: Display help for the IPv4 target.
ePower:/--> help /system1/settings/network/ipv4
ipv4 is a managed element and supports the following verbs:
cd set show version help
Properties:
address : dotted decimal format: e.g. 10.0.3.2
dhcp : y/n to enable/disable dhcp.
enable : This is used to enable or disable the element as a feature this accepts
text inputs (Y YES N NO TRUE FALSE YES NO)
gateway : dotted decimal format: e.g. 10.0.3.1
mask : dotted decimal format: e.g. 255.255.255.0