User manual

Appendix A – CLI Command Reference
74 ePower Power Distribution Unit User Manual, Revision 1.1
Properties
Properties specify terms to use as filters. Results are returned only if they
contain the specified property names. Do not use spaces within properties,
such as between an equal sign and a value.
Example 1: Set the working directory only within MyDomain.
ePower:/--> set /system1/settings/network domain=MyDomain
Example 2: The property
in this sample command is “address==10.0.3.120”.
ePower:/--> show -d properties -l all /system1/settings address==10.0.3.120
Verb Descriptions
The supported ePower verbs are:
• cd
• commit
• exit
• help
• reset
• set
• show
• version
Each verb, as well as its syntax, description, response, and properties
(as applicable) is discussed in the sections that follow.