User manual

Chapter 6 – Configuring Cyber Breaker the Virtual Circuit Breaker
ePower Power Distribution Unit User Manual, Revision 1.1 61
To configure a Virtual Circuit Breaker to the same settings as Example 2,
set the parameters in the Web interface:
1. On the Home page, select the bank and outlet for which you want
to set the Virtual Circuit Breaker:
2. In the Outlet Options > Alerts tab, select Enabled under
Virtual Circuit Breaker, then enter the appropriate values
for the Threshold, Max. Grace Period, Min. Grace Period,
and Curve Constant, as shown:
3. Select Save.