User manual
Chapter 5 – Using the LCD Touch Screen
52 ePower Power Distribution Unit User Manual, Revision 1.1
Lock Screen
To lock the ePower LCD touch screen:
1. Select the Lock Screen menu item.
2. Enter a passkey on the LCD touch screen keypad. The passkey can
be any combination of numbers and letters on the keypad. Press
the “0x”/”#” key to change the keypad from numbers to hex letters
and vice versa.
3. Select Done.
4. Enter the passkey a second time, to verify the entry.
5. Select Done. If the second passkey matches the first passkey,
a “Success” message is displayed.
The display returns to the home screen, and responds to all attempts
to use the LCD touch screen, by displaying the Locked Screen page.