User manual

Chapter 4 – Using the Command Line Interface
44 ePower Power Distribution Unit User Manual, Revision 1.1
Where:
• verb – show
The verb describes the action that is to be performed on a specified
target or property.
•options – “-d properties” and “-l all”
Options are flags that change the way that the verb acts.
• target –
/system1/settings
The target specifies the managed element on which that verb operates.
• properties – address==10.0.3.120
Properties specify terms to use as filters.
The supported ePower verbs are:
• cd – Changes the current default target
• commit – Sets and/or updates a section of properties within
a managed element
• exit – Terminates the ePower CLI process
• help – Displays information regarding how to use the ePower CLI
• reset – Restarts the ePower unit, from boot-up
• set – Sets the value of properties within a managed element
• show – Displays the contents of a target
• version – Displays current version information for the ePower
firmware
Refer to Appendix A, “CLI Command Reference,” for a detailed
syntax description.