User manual

Chapter 3 – Using the ePower Web Interface
ePower Power Distribution Unit User Manual, Revision 1.1 33
– Advanced – Enter crontab commands in the text box.
The supported commands are:
• On
• Off
• Reboot
NOTE crontab is a configuration file that specifies outlet state change events
to perform on a specific schedule.
To enter crontab commands:
1. Select Advanced from the drop-down menu.
2. Enter commands in the text box (refer to Figure 3-6).
3. Select OK.
Figure 3-6 Outlet Control Pane – Scheduling Tab - Advanced