User manual

Chapter 3 – Using the ePower Web Interface
ePower Power Distribution Unit User Manual, Revision 1.1 31
• Alerts
– Enabled check boxes – Select to allow access to items on the
Outlet Alerts tab.
– Virtual Circuit Breaker – Enter the Threshold, Maximum
Grace Period, Minimum Grace Period, and Curve
Constant; refer to Chapter 6, “Configuring Cyber Breaker the
Virtual Circuit Breaker.”
– High Current Alert – Enter the Threshold and Maximum
Grace Period, then select Save.
– Low Current Alert – Enter the Threshold and Maximum
Grace Period, then select Save.
– Email Notification List – Enter a comma-separated list of email
address to notify if limits are reached. Email alerts are also entered
in the Setup Logging pane.
• Outlet Critical Alert Example
Load on Outlet 1 (18.3 A) exceeds 100% safety limit (15.0 A)
• Outlet Warning Alert Example
Load on Outlet 1 (14.8 A) exceeds 80% safety limit (12.0 A)
• Outlet Safety Virtual Circuit Breaker Alert Example
Load on Outlet 1 tripped Virtual Circuit Breaker safety limit
• Outlet User-Defined Virtual Circuit Breaker Alert Example
Load on Outlet 1 (17.3 A) tripped Virtual Circuit Breaker limit (15.7A)
• Outlet User-Defined High Current Alert Example
Load on Outlet 1 (9.6 A) exceeds user-defined high current limit (8.0 A)
• Outlet User-Defined Low Current Alert Example
Load on Outlet 1 (1.2 A) exceeds user-defined low current limit (3.0 A)