User manual

Chapter 3 – Using the ePower Web Interface
30 ePower Power Distribution Unit User Manual, Revision 1.1
The Outlet Controls pane includes three tabs – General, Alerts,
and Schedule:
• General – Refer to Figure 3-4.
– Outlet Name – Enter an outlet name. The outlet name is used
on the Home and Web Services pages.
– Keywords – A comma-separated list of keywords that can be used
for filtering queries sent by way of Cisco EnergyWise.
– Importance – A ranking (on a scale of 1 to 100) that compares
the relative importance of this outlet versus others in the Cisco
EnergyWise domain. This ranking is typically used as a filter
for policy-based network management. By convention, a lower
value (1) is less important than a higher value (100).
– Reboot Delay – During a Reboot, the outlet is sequenced Off,
then On. The Reboot delay is the time (in seconds) between
turning an outlet Off, then On. Decimal values (for example, 5.375)
are accepted.
– Overall Outlet Status – Displays Current (A), Voltage (V),
Frequency (Hz), Apparent Power (VA), Real Power (W),
and Power Factor for the outlet.
Figure 3-4 Outlet Controls Pane – General Tab