User manual

ePower Power Distribution Unit User Manual, Revision 1.1 23
3 Using the ePower Web Interface
Connecting to the Web Interface
The ePower Web interface can be accessed with a standard Web browser,
using the Ethernet interface.
To connect to an ePower unit through a Web browser:
1. Attach the ePower unit to an Ethernet port on your computer
or router, using an Ethernet cable.
2. Note the ePower unit IP address or fully qualified domain
name (FQDN).
NOTE You can use the LCD touch screen to verify the ePower unit’s
IP address.
3. In the Web browser, enter the address or FQDN of the ePower unit.
4. Log in, using admin and password as the User Name and Password,
respectively. (After other user accounts are created, they can also be
used to log in.)
CAUTION To prevent unauthorized access to the ePower PDU, periodically
change the password.
5. The Home page, shown in Figure 3-1, opens.