User manual

Chapter 2 – Installing the ePower PDU
12 ePower Power Distribution Unit User Manual, Revision 1.1
3. Insert the buttonhooks into the large openings of the buttonholes
on the rack, then lower the ePower unit until the buttonhooks rest
in the lower slots of the buttonholes.
4. Determine whether the LCD touch screen can be easily viewed and
used at the installed height. If not, lift and remove the buttonhooks
from the rack buttonholes, then repeat steps 3 and 4, reinstalling
the ePower unit at a different height on the rack.
CAUTION The ePower input cord must be connected to a grounded circuit
with sufficient rating for the equipment that will be connected to the ePower
outlets. In addition, consideration must be given to the following issues:
• Reliable Earthing – Reliable earthing/grounding of rack-mounted
equipment must be maintained. Particular attention must be given to
supply connections other than direct connections to the branch circuit
(such as the use of power strips).