User manual
ePower Power Distribution Unit User Manual, Revision 1.1 9
2 Installing the ePower PDU
Perform these two steps to install the ePower PDU:
• Installing the ePower Hardware
• Configuring the Initial ePower Communication
Safety Instructions
For your safety, observe the following precautions when setting up the
ePower PDU:
CAUTION At initial inspection, if the ePower unit appears to be damaged,
do not install it. Contact Cyber Switching immediately.
CAUTION Ensure that the power source’s voltage and frequency match
the voltage and frequency that are listed on the Cyber Switching equipment
electrical rating label.
WARNING Never place foreign objects of any kind through openings in the
equipment. Conductive foreign objects produce a short circuit that can cause
fire, equipment damage, and/or electrical shock.
WARNING To reduce the risk of fire or electric shock, install in a controlled
environment that is relatively free of contaminants.