Users Guide

59 Dell EMC PowerEdge MX SmartFabric Configuration Guide with Cisco ACI
MX9116n-1# show qos system
Service-policy (input): PM_VLAN
ETS Mode : off
5.2.9 show policy-map
Using the service policy from show qos system, the show policy-map command displays QoS policy
details including class maps and QoS group settings. The QoS group values should match those configured
for each VLAN. See Section 2.7 in the Dell EMC PowerEdge MX SmartFabric Configuration and
Troubleshooting Guide for more information on QoS groups.
MX9116n-1# show policy-map
Service-policy (application) input: policy-iscsi
Service-policy (qos) input: PM_VLAN
Class-map (qos): CM1611
set qos-group 5
Class-map (qos): CM1612
set qos-group 5
Class-map (qos): CM1613
set qos-group 5
Class-map (qos): CM1614
set qos-group 3
Class-map (qos): CM1615
set qos-group 3
Class-map (qos): CM1616
set qos-group 3
5.2.10 show class-map
The show class-map displays details for all the configured class maps. For example, the association
between CM1611 and VLAN 1611 is shown.
MX9116n-1# show class-map
Class-map (application): class-iscsi
Class-map (qos): class-trust
Class-map (qos): CM1611(match-any)
Match: mac vlan 1611
Class-map (qos): CM1612(match-any)
Match: mac vlan 1612
Class-map (qos): CM1613(match-any)
Match: mac vlan 1613
Class-map (qos): CM1614(match-any)
Match: mac vlan 1614
Class-map (qos): CM1615(match-any)
Match: mac vlan 1615
Class-map (qos): CM1616(match-any)
Match: mac vlan 1616