Owners Manual
Table Of Contents
- Dell EMC PowerEdge MX840c Installation and Service Manual
- About this document
- Dell EMC PowerEdge MX840c overview
- Initial system setup and configuration
- Installing and removing sled components
- Safety instructions
- Before working inside your sled
- After working inside your sled
- Recommended tools
- PowerEdge MX840c sled
- Sled cover
- Air shroud
- Processor expansion module
- Drives
- Drive backplane
- Cable routing
- Drive cage
- Battery backup unit
- Control panel
- System memory
- Processors and heat sinks
- iDRAC card
- PERC cards
- Optional Internal dual SD module
- M.2 BOSS module
- Mezzanine card
- Optional internal USB memory key
- System battery
- System board
- Trusted Platform Module
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Figure 2. Inside the sled with PEM
1. Backplane 2. Processor expansion module (PEM) board
3. Processor 3 socket 4. Processor 4 socket
5. Mezzanine card (Fabric A2 card) 6. Rotational guiding hook
7. Power connector 8. Mezzanine card (Fabric B2 card)
9. Mini Mezzanine card (Fabric C2 card) connector
Figure 3. Inside the sled with system board
1.
Backplane 2. Processor 1 socket
3. PEM connector 4. Processor 2 socket
5. Mezzanine card (Fabric A1 card) 6. Rotational guiding hook
7. Power connector 8. Mezzanine card (Fabric B1 card)
9. Mini Mezzanine card (Fabric C1 card) connector 10. iDRAC card
11. IDSDM/BOSS module connector 12. System board
13. PERC card connector
Dell EMC PowerEdge MX840c overview 9