Owners Manual

Figure 23. Removing the PEM
Next steps
1. Installing the processor expansion module.
Installing the processor expansion module
Prerequisites
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your sled section.
Steps
1. Lift the processor expansion module (PEM) by holding the blue handle and release lever.
CAUTION:
To avoid damage to the components on the edges of the PEM board, carefully lift and place the
PEM by holding only the blue handle and release lever.
2. Align the guides on the PEM with the guide slots on the sled and place the PEM on the sled.
3. Lower the release lever until it hooks into place with the blue handle.
28
Installing and removing sled components