Reference Guide

System ID and status LED indicator codes
The system ID indicator is located on the control panel of your sled.
Figure 2. System ID and status LED indicators
Table 1. System ID and status LED indicator codes
System ID indicator code Condition
Off Indicates system is in the off state.
Blinking amber or steady amber Indicates system fault or error condition.
Steady blue Indicates normal operating state.
Blinking blue Indicates system ID engaged. Blink rate is 1 Hz.
Power button LED
The power button LED is located on the front panel of your sled.
Figure 3. Power button LED
Table 2. Power button LED
Power button LED indicator code Condition
Off Sled is not operating, regardless of power supply available.
On Sled is operating, one or more of the non-standby power
supplies are active.
Slowly blinking Sled is performing powering on sequence and iDRAC is still
booting.
6 Dell EMC PowerEdge MX840c overview