Reference Guide

System diagnostics and indicator codes
The diagnostic indicators on the system front panel display system status during system startup.
Topics:
• System ID and status LED indicator codes
• Power button LED
• Drive indicator codes
• System diagnostics
System ID and status LED indicator codes
The system ID indicator is located on the control panel of your sled.
Figure 17. System ID and status LED indicators
Table 22. System ID and status LED indicator codes
System ID indicator code Condition
Off Indicates system is in the off state.
Blinking amber or steady amber Indicates system fault or error condition.
Steady blue Indicates normal operating state.
Blinking blue Indicates system ID engaged. Blink rate is 1 Hz.
Power button LED
The power button LED is located on the front panel of your sled.
Figure 18. Power button LED
3
System diagnostics and indicator codes 21