Owners Manual
Table Of Contents
- Dell EMC PowerEdge MX750c Installation and Service Manual
- Contents
- About this document
- Dell EMC PowerEdge MX750c system overview
- Initial system setup and configuration
- Minimum to POST and system management configuration validation
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- PowerEdge MX750c sled
- Sled cover
- Air shroud
- Processor and memory module blank
- Drives
- Drive backplane
- Cable routing
- Drive cage
- Control panel
- System memory
- Processor and heat sink module
- PERC card
- Optional IDSDM module
- M.2 BOSS card
- Mezzanine cards
- Optional internal USB memory key
- System battery
- System board
- Trusted Platform Module
- Upgrade Kits
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Dell EMC PowerEdge MX750c system
overview
The system is a 2S single width compute sled that supports:
● Up to two 3rd Generation Intel Xeon Scalable processors.
● Up to 32 DIMM slots.
● Up to six 2.5-inch SAS, SATA (HDD or SSD), or NVMe drives.
NOTE: All instances of SAS, SATA drives are mentioned as drives in this document, unless specified otherwise.
NOTE: For more information, see the Dell EMC PowerEdge MX750c Technical Specifications on the product
documentation page.
NOTE: The Dell EMC PowerEdge MX750c is compatible with the Dell EMC PowerEdge MX7000 enclosure running
OME-Modular 1.30 or higher. For more information about the enclosure, see the Installation and Service Manual for the
PowerEdge MX7000 at www.dell.com/poweredgemanuals.
Topics:
• Front view of the system
• Inside the system
• Locating the Express Service Code and Service Tag
• System information label
2
Dell EMC PowerEdge MX750c system overview 7