Owners Manual
Table Of Contents
- Dell EMC PowerEdge MX750c Installation and Service Manual
- Contents
- About this document
- Dell EMC PowerEdge MX750c system overview
- Initial system setup and configuration
- Minimum to POST and system management configuration validation
- Installing and removing system components
- Safety instructions
- Before working inside your system
- After working inside your system
- Recommended tools
- PowerEdge MX750c sled
- Sled cover
- Air shroud
- Processor and memory module blank
- Drives
- Drive backplane
- Cable routing
- Drive cage
- Control panel
- System memory
- Processor and heat sink module
- PERC card
- Optional IDSDM module
- M.2 BOSS card
- Mezzanine cards
- Optional internal USB memory key
- System battery
- System board
- Trusted Platform Module
- Upgrade Kits
- Jumpers and connectors
- System diagnostics and indicator codes
- Getting help
- Documentation resources
Figure 2. Front view of the 4 drive configuration
1. USB 3.0 port
2. iDRAC direct port
3. Drive blank
4. Drives
5. Release handle
6. Release handle button
7. Information tag
8. System health and System ID indicator
9. Power button
Inside the system
NOTE:
Components that are hot swappable have orange touch points and the components that are not hot swappable
have blue touch points.
Dell EMC PowerEdge MX750c system overview 9