Users Guide

34 Dell EMC PowerEdge MX SmartFabric Configuration Guide with Cisco ACI
Create Attachable Access Entity Profile
3. At bottom of page next to Application EPGs, click the Add(+) icon.
4. For the first EPG, webEPG1, select the following options:
a. From the Tenant drop-down, select Customer-TN1.
b. From the Application Profile menu, select ap1.
c. From the EPG menu, select webEPG1.
d. In the Encap field, enter vlan-1614.
e. Leave the Primary Encap field blank.
f. From the Mode menu, select Trunk.
g. Click Update.