Users Guide

32 Dell EMC PowerEdge MX SmartFabric Configuration Guide with Cisco ACI
Create Application Profile
4.2.15 Create Application EPGs
End point groups (EPGs) are logically grouped hosts or servers that share similar policies and perform similar
functions within the fabric.
Note: Refer to Table 3 for the required network information.
1. Click Tenants > Customer-TN1 > Application Profiles > ap1 > Application EPGs.
2. Right-click on Application EPGs and then select Create Application EPG.
3. In the Name field, enter webEPG1 as the name of the first EPG.
4. From the Bridge Domain drop-down, select webBD1.
5. Click Finish.