Users Guide

29 Dell EMC PowerEdge MX SmartFabric Configuration Guide with Cisco ACI
Create VRF
4.2.13 Create Bridge Domains
Layer 2 forwarding domain within the fabric is a Bridge Domain. Bridge domain is linked to a private network
and it can have multiple subnets.
Note: Refer to Table 3 as needed to complete the following steps.
Bridge domains are created for each VLAN as follows:
1. Click Tenants > Customer-TN1 > Networking > Bridge Domains.
2. Right-click on Bridge Domains and then select Create Bridge Domain.
3. In the field provided, enter the name of the first bridge domain, webBD1.
4. From the VRF drop-down, select VRF1 (created above in step 4.2.12), and click Next.