Users Guide

19 Dell EMC PowerEdge MX SmartFabric Configuration Guide with Cisco ACI
1. Go to Fabric > Access Policies > Physical and External Domains > Physical Domains.
2. Right-click on Physical Domain and select Create Physical Domain.
3. In the Name field, enter physDomain1.
4. From the VLAN Pool drop-down, select the VLANPool1 option (created above in section 4.2.1).
5. Click Submit.
Create Physical Domain
4.2.3 Create an Attachable Access Entity Profile
To create an Attachable Access Entity Profile, perform the following steps:
1. Go to Fabric > Access Policies > Policies > Global > Attachable Access Entity Profiles.
2. Right-click on Attachable Access Entity Profiles and select Create Attachable Access Entity
Profile.
3. In the Name field, enter AEP1.
4. In the Domains field, click Add(+) icon.
5. Select physDomain1 (created above in step 4.2.2) and then click Update.
6. Click Next and then Finish.
Create Attachable Access Entity Profile