Reference Guide

75 Dell EMC PowerEdge MX SmartFabric Deployment Guide
9.5.3.3 Verify ACI is learning endpoints
To verify ACI is learning endpoints, do the following:
1. In the APIC GUI, go to Tenants > Tenant name > Application Profiles > Application Profile name
> Application EPGs > select an Application EPG.
2. Click Operational at the top of the right pane as shown in Figure 56.
Cisco ACI endpoints in appEPG1
3. All learned endpoints for the selected EPG are displayed along with their VLAN, IP address, and
interface.
Repeat the steps above for the remaining Application EPGs.