Reference Guide

35 Dell EMC PowerEdge MX SmartFabric Deployment Guide
7.3 Verify configuration
This section covers the validation of the SmartFabric and the Z9100-ON leaf switches.
7.3.1 PowerEdge MX7000 validation
This section covers validation specific to the Dell EMC PowerEdge MX7000.
7.3.1.1 Show the MCM group topology
The OME-M console can be used to show the physical cabling of thee SmartFabric.
1. Open the OME-M console.
2. In the left pane click View Topology.
3. Click the lead chassis and then click Show Wiring.
4. The icons can be clicked to show cabling.
Figure 24 shows the current wiring of the SmartFabric.
SmartFabric cabling