CLI Reference Guide

Multicast Commands 669
show ip mcast mroute group
Use the show ip mcast mroute group command in Privileged EXEC mode to display the multicast
configuration settings such as flags, timer settings, incoming and outgoing interfaces, RPF
neighboring routers, and expiration times of all the entries in the multicast mroute table
containing the
groupipaddr value.
Syntax
show ip mcast mroute group groupipaddr {detail | summary}
• groupipaddr — IP address of the multicast group.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the multicast configuration settings such as flags, timer
settings, incoming and outgoing interfaces.
console#show ip mcast mroute group 224.5.5.5 summary
Multicast Route Table Summary
Incoming Outgoing
Source IP Group IP Protocol Interface Interface List
--------- --------------- --------- --------- ----------------
console#show ip mcast mroute group 224.5.5.5 detail
Multicast Route Table
Expiry Up Time
Source Ip Group Ip Time(secs) (secs) RPF Neighbor Flags
--------- --------- ----------- --------- --------------- -----