CLI Reference Guide

Command Groups 27
Syslog Commands
key-string Manually specifies a SSH public key. SK
show crypto key mypubkey Displays its own SSH public keys stored on the switch. PE
show crypto key pubkey-chain ssh Displays SSH public keys stored on the switch. PE
show ip ssh Displays the SSH server configuration. PE
user-key Specifies which SSH public key is manually configured and
enters the SSH public key-string configuration command.
SP
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
clear logging Clears messages from the internal logging buffer. PE
clear logging file Clears messages from the logging file. PE
description Describes the syslog server. L
level Specifies the importance level of syslog messages. L
loggin cli-command Enable CLI command logging GC
logging Logs messages to a syslog server GC
logging buffered Limits syslog messages displayed from an internal buffer
based on severity.
GC
logging buffered size Changes the number of syslog messages stored in the
internal buffer.
GC
logging console Limits messages logged to the console based on severity. GC
logging facility Sets the facility of the logging messages. GC
logging file Limits syslog messages sent to the logging file based on
severity.
GC
logging on Controls error messages logging. GC
port Specifies the port number of syslog messages. L
show logging Displays the state of logging and the syslog messages stored
in the internal buffer.
PE
show logging file Displays the state of logging and the syslog messages stored
in the logging file.
PE
show syslog-servers Displays the syslog servers settings. PE
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.