CLI Reference Guide

514 VLAN Commands
www.dell.com | support.dell.com
Syntax
name string
no name
• string —Comment or description to help identify a specific VLAN (Range: 1 - 32
characters).
Default Configuration
No name is defined.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
The VLAN name must be unique.
Example
The following example names VLAN number 19 with the name "Marketing."
console(config)#interface vlan 19
console(config-if-vlan19)#name Marketing
protocol group
Use the protocol group command in VLAN Database mode to attach a VLAN ID to the protocol-
based group identified by
groupid . A group may only be associated with one VLAN at a time.
However, the VLAN association can be changed. The referenced VLAN should be created prior to
the creation of the protocol-based group except when GVRP is expected to create the VLAN.
To detach the VLAN from this protocol-based group identified by this
groupid , use the no form of
this command.
Syntax
protocol group groupid vlanid
no protocol group groupid vlanid
• groupid —The protocol-based VLAN group ID, which is automatically generated when
you create a protocol-based VLAN group with the
vlan protocol group command. To see
the group ID associated with the name of a protocol group, use the
show port protocol all
command.
•
vlanid —A valid VLAN ID.