CLI Reference Guide

324 802.1x Commands
www.dell.com | support.dell.com
The following table describes the significant fields shown in the display:
show dot1x statistics
Use the show dot1x statistics command in Privileged EXEC mode to display 802.1x statistics for
the specified interface.
Field Description
Port The port number.
Admin mode The port admin mode. Possible values are: Force-auth,
Force-unauth, Auto.
Oper mode The port oper mode of the port. Possible values are: Authorized,
Unauthorized or Down.
Reauth Control Reauthentication control.
Username The username representing the identity of the Supplicant. This
field shows the username when the port control is auto. If the
port is Authorized, it shows the username of the current user. If
the port is unauthorized it shows the last user that was
authenticated successfully.
Quiet period The number of seconds that the switch remains in the quiet
state following a failed authentication exchange (for example,
the client provided an invalid password).
Tx period The number of seconds that the switch waits for a response to an
Extensible Authentication Protocol (EAP)-request/identity
frame from the client before resending the request.
Max req The maximum number of times that the switch sends an
Extensible Authentication Protocol (EAP)-request frame
(assuming that no response is received) to the client before
restarting the authentication process.
Server timeout Time in seconds the switch waits for a response from the
authentication server before resending the request.
State The current value of the Authenticator PAE state machine and
of the Backend state machine.
Authentication success Counts the number of times the state machine has received a
Success message from the Authentication Server.
Authentication fails Counts the number of times the state machine has received a
Failure message from the Authentication Server.